As a kind of grain machinery and equipment, corn processing equipment often has some problems in use, which will affect the processing quality and production efficiency. Therefore, in order to avoid unnecessary failure of the equipment, we should be familiar with common problems and treatment methods:
1. The corn processing equipment body shakes
If the corn processing equipment is swaying, it may be due to loose joints, the grinding head and the frame coupling bolts should be tightened. Prevent the emergence of more serious problems.
2, corn processing equipment is too hot
If the temperature of the corn processing equipment is too high during operation, the grinding roller should be loosened in time. If the grinding roller is seriously worn, it should be repaired or replaced immediately. When the temperature is high in summer, It is necessary to stop the machine and let the machine dissipate heat.
3, Corn processing equipment does not produce flour or less flour
It is common because the screen is clogged. At this time, the screen should be checked for blockage and the impurities should be cleaned immediately.
4, corn processing equipment does not produce bran
A common cause of this phenomenon is that the main shaft of the corn processing equipment is not properly turned, the screen frame is not tightly sealed or the screen is broken. In view of this situation, the installation settings of the corn processing equipment should be checked, the wear of each component should be checked, and the inspection should be replaced in time.
5, the output of corn processing equipment decreased
The most important thing for enterprises is the production output of corn processing equipment. If the equipment has a problem of reduced production, the spring of the corn processing equipment should be adjusted in time to ensure that the gap between the two ends of the grinding roller is consistent, and the worn teeth should be repaired and maintained.